Charging pile operation

Product classification

Contact us

Shenzhen Hongjiali New Energy Co.Ltd

Sales Hotline: 13418688926  15919794865

After sale telephone: 14774839877

Phone: 0755-23696610

Mailbox: hjl_market@163.com

Address: No. 412, Chang Feng Road, Baoan District, Shenzhen, Guangdong.


Vertical AC DC charging pile

Your current position: Home page >> Products >> DC charging pile

Vertical AC DC charging pile

  • Taxonomy:DC charging pile

  • Click times:
  • Date of release:2018/07/20
  • Online inquiry
Detailed introduction

product manual:


Input (output) parameters: 250A charging current: 250A (A) Certification: 3C


Scope of application: electric vehicle charging equipment


Main features: Three charging modes: timed charging, quantitative charging and smart charging.


Timed charging: Set the length of the charging time, the minimum unit is set to 10min.


Quantitative charging: Set the amount of charging power, the minimum unit is set to 0.5 degrees. In the case where the battery is not required to be fully charged and the vehicle can be put into operation immediately after a certain amount of power is supplied, the user can select the timed charging or the quantitative charging mode.


Intelligent charging: It is suitable for users who have ample time. The charging process is intelligent and continuous charging according to the actual battery condition until the battery is full.


Main features: integrated waterproof design, outdoor installation.


The vehicle charging source system is separated from the charging management screen, and the charging management screen realizes the management, charging and corresponding battery state detection of the electric vehicle charging. With intelligent control, the operating parameters and diagnostic information of the charger can be provided in real time;


Modular: high-frequency rectifier module redundant backup operation, high average flow and high reliability;


The input power factor is high and the electromagnetic compatibility is good; the AC input adopts three-phase active power factor correction technology, the input power factor is up to 0.99, and the input current distortion rate is less than 5%;


Intelligent control: the module output provides voltage regulating port, regulating port, voltage and current feedback analog signal, external switch port, etc.; the current limit can be continuously set according to the battery capacity according to the given signal of the monitor, and continuously set according to the battery type. Fixed charge and float charge voltage; both, floating charge mode automatically convert;


The resonant soft switching technology is adopted, the conversion efficiency is high, the volume is small, and the peak efficiency of the whole machine is as high as 93% or more;


The output can be short-circuited for a long time, and the short-circuit current is constant as the maximum output current of the system;


The output DC voltage and current adjustment range are wide, which can be applied to batteries of different voltage levels;


Complete protection: AC voltage is too high, too low protection; output overvoltage or undervoltage, overcurrent protection, over temperature protection, overload protection, battery reverse connection protection, current surge protection.


project

功能参数

Double gun model

EVP700-160/15000-0C-SG2D

EVP700-160/15000-0C-SG2D

EVP500-240/15000-0C-SG2D

EVP400-272/15000-0C-SG2D

EVP700-160/15000-0C-SG2D

EVP700-160/15000-0C-SG2D

EVP500-240/15000-0C-SG2D

EVP400-272/15000-0C-SG2D

Input voltage

AC380V±15%

AC input frequency

50Hz

DC output voltage

DC200-750V

DC200-750V

DC200-500V

DC100-450V

DC200-750V

DC200-750V

DC200-500V

DC100-450V

Rated output current

80A

104A

120A

136A

80A

108A

120A

140A

Maximum output power

120KW

180KW

Module configuration model

EVR700-15000

EVR600-15000B

EVR500-15000

EVR400-15000

EVR700-15000

EVR600-15000B

EVR500-15000

EVR400-15000

Number of module configurations

8

12

Current limit protection value

≥1.1le

Voltage regulation accuracy

≤±0.5%

Steady flow accuracy

≤±0.5%

Ripple coefficient

≤±0.5%

effectiveness

≥94%

Power factor(PF)

≥0.98

Harmonic current(THD)

≤ 5%

Boot surge

Cabinet size

800mm×2100mm×650mm [Weight × Height × Deep]

cooling method

Forced air cooling

Protection level

IP54

noise

≤ 60dB

Communication Interface

CAN RS485 and Ethernet port

The address of this article:http://en.hongjialixny.com/product/542.html

Key word:VerticalACDCchargingpile,ACDCchargingpile,Chargingpile

Recently browse:

  • Service
  • number
    14774839877
  • Message
  • web site
  • Online Service